Project Description
Commitment to You
We are committed to integrate steel resources in china and serve the global steel market. We have 15+ years of experience in steel researching, production, managing and sales.
Our ability to purchase materials directly from leading mills will give you the competitive edge. Any Questions Just Call +86-731-89903933
Application:
It can be used to shafts, gears and parts subject to mechanical wear.
Standard:
- JIS G3441 Alloy Steel Tubes for Machine Purposes
- EN10297 Seamless Circular Steel Tubes for Mechanical and General Engineering Purposes
- ASTM A519 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
Steel Grades:
- JIS G3441: SCM435TK.
- EN10297: 1.7220, 34CrMo4.
- ASTM A519: 4135.
Competitive Advantage:
- High strength.
- High tenacity.
- Good hardenability.
- High resistance to thermal properties.
- Competitive price.
- Fast production leadtime.
Sizes Range:
OD:10.2mm-810mm, WT:1.6mm-100mm.
Chemical Composition(%):
Grades | C | Si | Mn | P | S | Cr | Ni | Mo | Cu |
---|---|---|---|---|---|---|---|---|---|
42CrMo | 0.38-0.45 | 0.17-0.37 | 0.50-0.80 | 0.025 max | 0.025 max | 0.90-1.20 | 0.25 max | 0.15-0.25 | 0.30 max |
SCM440TK | 0.38-0.43 | 0.15-0.35 | 0.60-0.85 | 0.03 max | 0.03 max | 0.90-1.20 | 0.25 max | 0.15-0.30 | 0.30 max |
42CrMo4 | 0.38-0.45 | 0.40 max | 0.60-0.90 | 0.035 max | 0.035 max | 0.90-1.20 | / | 0.15-0.30 | 0.25 max |
4140 | 0.38-0.43 | 0.15-0.35 | 0.75-1.00 | 0.040 max | 0.040 max | 0.80-1.10 | / | 0.15-0.25 | 0.30 max |
Outer Diameter Tolerances
+/-1%, or +/-0.5mm (Chose the bigger one)
Wall Thickness Tolerances
Scope of Outer Diameter | Ratio of Wall Thickness and Outer Diameter (WT/OD) | Tolerance |
---|---|---|
102mm max | / | +/12.5% or +/-0.4mm (Chose the bigger one) |
102mm min | 0.05 max | +/15% or +/-0.4mm (Chose the bigger one) |
102mm min | 0.05-0.10 | +/12.5% or +/-0.4mm (Chose the bigger one) |
102mm min | 0.10 min | (-10%, +12.5%) |
Delivery Conditions
Hot Rolled only
Stress Relieved
Annealed
Normalized
Quenched and Tempered
Surfaces Conditions
- Black surface with oxygen skin.
- Grinded for external or internal surface, or external and internal surface.
- Peeled for external or internal surface, or external and internal surface.
Mechanical Properties (Quenched and Tempered) (T=20°C if not differently stated)
Wall Thickness (mm) | Tensile Strength (Mpa) | Yield Strength(Mpa) | Elongation (Longitudinal) (%) | Elongation (Transverse) (%) | Notch impact energy (Longitudinal) [J] | Notch impact energy (Transverse) [J] |
---|---|---|---|---|---|---|
8 max | 1100 max | 900 min | 10 min | 8 min | 30 min | / |
8-20 | 1000 max | 750 min | 11 min | 9 min | 35 min | 22 min |
20-50 | 900 max | 650 min | 12 min | 10 min | 35 min | 22 min |
50-80 | 800 max | 550 min | 13 min | 11 min | 35 min | 22 min |
Recommended Heat Treatment Temperatures:
Heat Treatment | Temperatures (°C) |
---|---|
Annealing | 680-720 |
Normalizing | 840-880 |
Austenitizing | 820-860 |
Tempering | 540-680 |
Tube Ends:
The hollow bar comes with square cut and deburred ends.
Certification:
The hollow bar is supplied with 3.1.B inspection certificate,according to the standards EN 10204 and ISO 10474.
Identification and Marking:
The hollow bar is marked in indelible ink, the details being repeated along the entire length of each tube and on a label, as follows:
Manufacturer’s trademark – manufacturing standard – dimensions -steel grade – supply condition – cast no. – item number.
Packaging:
The hollow bar comes in strapped bundles. The minimum weight of each bundle is 2000kg; the maximum bundle weight being 5000kg, with a minimum of 4 pieces.
Experienced 15+ Years
Our ability to purchase materials directly from leading mills at the best possible price will give you the competitive edge. This coupled with a skilled workforce dedicated to embracing the demands of the markets.
We Can Supply Follows Products with High Quality:
- Cold Rolled Steel Tube
- Cold Drawn Steel Tube
- Hollow Bar
- Honed Tube
- Plated Tube
- Plated Bar
- Boiler Tube
All Products According Quality Standard Strictly:
- ASTM: ASTM A519, ASTM A513.
- JIS:JIS G3441, JIS G3445, JIS G3466, JIS G3459.
- DIN: DIN1626, DIN1629, DIN2391, DIN2393, DIN2448, DIN2458.
- EN: EN10305.
- BS: BS6323.
Wide Range of Pipes to Fit Your Industry:
- OD from 5mm to 820mm.
- Wall Thickness from 0.1 to 100mm.
- Length up to 50mtr per pc.
Can’t Find What You Looking for? Check Popular Items Blew.
Direct from the Source and Deliver to You in a Very Fast and Efficient Timeframe.