FOOD-GRADE STAINLESS STEEL TUBING

Sanitary Tubing

Manufactured to the stringent ASTM A270 S2 specifications, this high-quality tubing is 100% bore-scoped and polished on both the ID and OD. proprietary finishing processes guarantee specific ID and OD Ra values for customers’ application, minimizing surface anomalies.

Sanitary Stainless Steel Tubing

For Dairy, Food, Beverage, and Other Sanitary Processes RathGibson’s sanitary tubing exceeds ASTM A270 S2 and 3A speci cations and most user speci cations. It is manufactured from the nest quality stainless steel materials made exclusively to the RathGibson melt criteria and formed by the RathGibson Micro-WeldTM process to assure weld seam integrity and industry leading ID and OD nishes to the low Ra values demanded by RathGibson’s customers. RathGibson leads the industry in manufacturing the highest quality welded sanitary tubing, backed with technical expertise, advanced manufacturing and polishing capabilities, and unmatched service before and after the sale.Tubing is sold in 20 foot lengths.

A270-BPE series tubing significantly reduces customer inspection requirements prior to installation by utilizing only the highest quality stainless steel material. Tubing is available in 1/2″ (12.7 mm) to 6″ (152.4 mm) OD in stock 20′ (6.1 m) lengths.

Sanitary Tubing

Sanitary rigid tubing when combined with sanitary ferrules can be welded and fabricated into sanitary pipe lines. As a final step in maintaining sanitary process standards, Glacier Tanks tubing is protected with plastic caps and sealed in 2-mil poly sleeves to prevent contamination. Glacier Tanks offers standard lengths of tubing from 12″ through 20′ (240″) in 1 foot increments, and in tube OD sizes from 1″ through 4″. Be sure to contact us for custom lengths, case quantities, and special spool requirements. Bio-Pharm BPE tubing is available upon special request. Tubes are printed with size, gauge, alloy, ASTM and ASME specifications and heat number.

 

 

sanitary tubing that exceeds ASTM A270 S2 and 3-A specifications. It is manufactured from the finest quality stainless steel materials

SPECIFICATIONS

sanitary food-grade tubing is manufactured and ships in standard tubing sizes ranging from 1/2 inch to 8 inches in diameter. The product-contact (ID) surface finish is 20 μ-in Ra (0.5 μm), with an outer diameter (OD) of 30 μ-in Ra (0.8 μm) maximum. Surface finishes are measured per ASME/ANSI B46.1, with the profilometer reading at 90 degrees to the major polishing pattern.

Strength:

Material of stainless steel 316L and 1.4404 is from reputed mill to guarantee the chemical composition and mechanical properties of sanitary tubings. Material certificate will be submitted to orders.

Heat Treatment of solution annealing for the sanitary tubings and fittings are available. The heat treated will be relief stress which caused by cold forming of fabrication, to improve the corrosion performance.

High precision on dimension and wall thickness.

Bright annealing is available.

Fast delivery for general specification to meet your needs well in time.

Both seamless and welded sanitary tubings are available to meet your different usage.

Multiple grade upon your requirement.

Length is up to 12 meters.

Min. order quantity of sanitary tubings is from 300Kgs.

Offer industrial pipe and tubes according to order.

Surface roughness condition < Ra 32.

 

Quality & Inspection:

PMI test to verify material grade.

Dimension controlling.

Visual and surface 100% examination before shipment.

End protected for shipment.

Packed in wooden case (Free-fumigated).

 

Polishing Opinion:

Mechanically is available to meet your high quality requirement on the surface of sanitary tubings. Outer and Inner surface can be treated complied to specified needs, and to meet FDA, GMP requirement.

Inner and Outer Polished : Ra 20 (0.5?m), Ra 25 (0.6?m) , Ra 32 (0.8?m)  or  Grit 180, 200, 320 etc.

Inner polished and external pickled

Inner pickled and external polished

Both Internal and external pickled

Internal and external bright annealing solutions

 

Application:

Food, Brewery, Beverage, Dairy, Pharmaceutical, Biopharma etc.

Sanitary Tubings – Polished Stainless Steel Tube – Food Grade Stainless Steel Hygienic Pipe Standard	ASTM A270,  ASTM A249, ASTM A269, ASTM A213, EN/DIN etc.
Material	T304, T316L, EN 1.4301, EN 1.4404 etc.
Size	Outside Diameters: 1/2″ ~ 12″, Wall Thickness: 0.020″ ~ 0.250″
Surface	Descaled finish, Mirror polished on requested
Application	Food, Brewery, Beverage, Dairy, Pharmaceutical, Fine chemical, Cosmetic etc.
How to order	*Part Name*Dimension*Material*Quantity*Polish requests for OD/ID

 

Dimension Table of Sanitary Tubing – Polished Stainless Steel Tubing – Food Grade Stainless Steel Pipes

ISO/IDF			SMS-DS				3A			ISO 2037(JIS G3447)
Size	D	t	Size	D	1	2	Size	D	t	Size	t
1/2″	12.7	1.5/1.0	25	25	1.25	1.5	1/2″	12.7	1.65	12	1.0
3/4″	19.1	1.5/1.0	32	32	1.25	1.5	3/4″	19	1.65	12.7	1.0
1″	25.4	1.5/1.2	38	38	1.25	1.5	1″	25.4	1.65	17.2	1.0
1.25″	31.8	1.5/1.2	51	51	1.25	1.5	1 1/2″	38.1	1.65	21.3	1.0
1.5″	38.1	1.5/1.2	63.5	63.5	1.5	2.0	2″	50.8	1.65	25	1.2/1.6
Ø45	45.0	2.0	76	76	1.6	2.0	2 1/2″	63.5	1.65	33.7	1.2/1.6
Ø48	48.0	1.5	89	89	2.0	2.0	3″	76.2	1.65	38	1.2/1.6
2″	50.8	1.5	101.6	101.6	2.0	2.0	4″	101.6	2.1	40	1.2/1.6
Ø57	57.0	2.0					6″	152.4	2.8	51	1.2/1.6
2.5″	63.5	2.0					8″	203.2	2.8	63.5	1.6
3″	76.2	2.0					10″	254	3.4	70	1.6
3.5″	89.0	2.0					12″	305	3.4	76.1	1.6
4″	101.6	2.0								88.9	2.0
Ø108	108.0	2.0								101.6	2.0
4.5″	114.3	3.0								114.3	2.0
Ø133	133.0	3.0								139.7	2.0
Ø159	159.0	3.0								138.3	2.6
Ø204	204.0	3.0								219.1	2.6

 

ISO/IDF			SMS-DS				3A			ISO 2037(JIS G3447)
Size	D×t	D×t	D×t	D×t	Size	t	Size	t	Size	D	t
DN10	12×1.0	13×1.5	14×2.0	12×1.5	12.7	1.2	26.9	1.6	8A	13.8	1.65
DN15	18×1.0	19×1.5	20×2.0	18×1.5	15.88	1.2	33.7	2.0	10A	17.3	1.65
DN20	22×1.0	23×1.5	24×2.0	22×1.5	19.05	1.2	42.4	2.0	15A	21.7	2.1
DN25	28×1.0	29×1.5	30×2.0	28×1.5	25.4	1.2/1.6	48.3	2.0	20A	27.2	2.1
DN32	34×1.0	35×1.5	36×2.0	34×1.5	38.1	1.2/1.6	60.3	2.0	25A	34.0	2.8
DN40	40×1.0	41×1.5	42×2.0	40×1.5	50.8	1.2/1.6	76.2	2.0	32A	42.7	2.8
DN50	52×1.0	53×1.5	54×2.0	52×1.5	63.5	1.6/1.6	88.9	2.0	40A	48.6	2.8
DN65		70×2.0		70×2.0	76.2	1.6/1.6	114.3	2.0	50A	60.5	2.8
DN80		85×2.0		85×2.0	101.6	2.0	139.7	2.0	65A	76.3	3.0
DN100		104×2.0		104×2.0	114.3	2.0	168.3	3.6	80A	89.1	3.0
DN125		129×2.0		129×2.0	139.7	2.6	219.1	3.6	90A	101.6	3.0
DN150		154×2.0		154×2.0	168.3	2.6			100A	114.3	3.0
DN200		204×2.0		204×2.0	219.1				125A	139.8	3.4
									150A	165.2	3.4
Series1  series2   Series3 series4									200A	216.5	3.4

*We also provide stainless steel tubes and pipes with unpolished and pickled surface to meet industrial usage.

* For more information and specification about sanitary tubings, please contact us here.

 

MECHANICAL TESTS

To ensure the highest surface quality in all of our sanitary tubing, RathGibson goes beyond the requirements of ASTM A269 and A270 by performing the full battery of ASTM bend and deformation tests required by ASME SA249 as well as additional deformation tests developed by RathGibson. The tests, combined with specific raw material requirements, Eddy Current testing at the tube mill, 100% borescoping prior to mechanical polish, and tighter OD and wall tolerances, allow RathGibson to provide a more consistent, superior quality product.

ANNEALING

Tubing is hydrogen bright annealed in line to 1900°F (1040°C) minimum and rapidly quenched.

SURFACE FINISH

Surface finish is 20 μ-in Ra (0.5 μm) ID maximum, 30 μ-in Ra (0.8 μm) OD maximum surface roughness measured per ASME/ANSI B46.1 with the profilometer reading at 90 degrees to major polishing pattern. RathGibson’s polishing techniques result in surface finishes that lead the industry. All tubing is printed with size, gauge, alloy, ASTM and ASME specifications, heat number, and date of manufacturing for full traceability.

PACKAGING

As a final step in maintaining purity standards, RathGibson’s A270 S2 tubing is packaged using protective 2 mil poly sleeving along with airtight plastic end caps.

DIMENSIONAL TOLERANCES

Size OD		Nominal Wall Thickness		Outside Diameter Tolerance		Length Tolerance		Wall Thickness Tolerance
(in)	(mm)	(in)	(mm)	(in)	(mm)	(in)	(mm)	(%)
½	12.7	0.065	1.65	+/-0.005	+/-0.13	+⅛, -0	+3.18, -0	+/-10.0%
¾	19.1	0.065	1.65	+/-0.005	+/-0.13	+⅛, -0	+3.18, -0	+/-10.0%
1	25.4	0.065	1.65	+/-0.005	+/-0.13	+⅛, -0	+3.18, -0	+/-10.0%
1½	38.1	0.065	1.65	+/-0.008	+/-0.20	+⅛, -0	+3.18, -0	+/-10.0%
2	50.8	0.065	1.65	+/-0.008	+/-0.20	+⅛, -0	+3.18, -0	+/-10.0%
2½	63.5	0.065	1.65	+/-0.010	+/-0.25	+⅛, -0	+3.18, -0	+/-10.0%
3	76.2	0.065	1.65	+/-0.010	+/-0.25	+⅛, -0	+3.18, -0	+/-10.0%
4	101.6	0.083	2.11	+/-0.015	+/-0.38	+⅛, -0	+3.18, -0	+/-10.0%
6	152.4	0.109	2.77	+/-0.030	+/-0.76	+1, -0	+25.4, -0	+/-10.0%
8	203.2	0.109	2.77	+0.061 -0.031	+1.55 -0.79	+1, -0	+25.4, -0	+/-10.0%

Stainless Steel Sanitary Tube Specification

Stainless Steel Sanitary Tube Type	Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing
ASTM	ASTM A270 / ASME SA 270
OD.	1/2”
Wall	16 Gauge (0.065”)
Length	20′
OD Tolerance	+/-0.005” / +/-0.13MM
WT Tolerance	+/-10%
Length Tolerance	+1/8” / +3.18MM
Material	SS 304, SS 304L,SS 316,SS 316L
Standard	3A / ASTM A270 / A270M
Finish	20Ra ID / 32Ra OD
Polish	Mechanical Polished
Type	Seamless
Certification	3A – Food / Dairy Grade
Mill Test Certificate	EN10204 3.1
Packing	Sleeved, Ends Capped, Wooden Boxed

SS SANITARY TUBE DIMENSIONS / SS SANITARY TUBE SIZES CHART

STAINLESS STEEL TUBES DIMENSIONS

Tube OD	Thikness	Grade
1/2	0.065	304
1/2	0.065	316
3/4	0.065	304
3/4	0.065	316
1	0.065	304
1	0.065	316
1 1/2	0.065	304
1 1/2	0.065	316
2	0.065	304
2	0.065	316
2 1/2	0.065	304
2 1/2	0.065	316
3	0.065	304
3	0.065	316
4	0.083	304
4	0.083	316
6	0.109	304
6	0.109	316
8	0.109	304
8	0.109	316

 

OD inches	Ave. Wall inches	D/t Ratio	ID inches	Tube Cross Sectional Area (in2)	Internal Area (in2)
0.250	0.020	12.50	0.210	0.0145	0.0346
0.250	0.028	8.93	0.194	0.0195	0.0296
0.250	0.035	7.14	0.180	0.0236	0.0254
0.250	0.049	5.10	0.152	0.0309	0.0181
0.250	0.065	3.85	0.120	0.0378	0.0113
0.375	0.020	18.75	0.335	0.0223	0.0881
0.375	0.028	13.39	0.319	0.0305	0.0799
0.375	0.035	10.71	0.305	0.0374	0.0731
0.375	0.049	7.65	0.277	0.0502	0.0603
0.375	0.065	5.77	0.245	0.0633	0.0471
0.500	0.020	25.00	0.460	0.0302	0.1662
0.500	0.028	17.86	0.444	0.0415	0.1548
0.500	0.035	14.29	0.430	0.0511	0.1452
0.500	0.049	10.20	0.402	0.0694	0.1213
0.500	0.065	7.69	0.370	0.0888	0.1075
0.500	0.083	6.02	0.334	0.1087	0.0876
0.625	0.020	31.25	0.585	0.0380	0.2688
0.625	0.028	22.32	0.569	0.0525	0.2543
0.625	0.035	17.86	0.555	0.0649	0.2419
0.625	0.049	12.76	0.527	0.0887	0.2181
0.625	0.065	9.62	0.495	0.1144	0.1924
0.625	0.083	7.53	0.459	0.1413	0.1655
0.625	0.095	6.58	0.435	0.1582	0.1486
0.625	0.109	5.73	0.407	0.1767	0.1301
0.750	0.028	26.79	0.694	0.0635	0.3783
0.750	0.035	21.43	0.680	0.0786	0.3632
0.750	0.049	15.31	0.652	0.1079	0.3339
0.750	0.065	11.54	0.620	0.1399	0.3019
0.750	0.083	9.04	0.584	0.1739	0.2679
0.750	0.095	7.89	0.560	0.1955	0.2463
0.750	0.109	6.88	0.532	0.2195	0.2223
0.750	0.120	6.25	0.510	0.2375	0.2043
0.875	0.020	43.75	0.835	0.0537	0.5476
0.875	0.028	31.25	0.819	0.0745	0.5268
0.875	0.035	25.00	0.805	0.0924	0.5090
0.875	0.049	17.86	0.777	0.1272	0.4742
0.875	0.065	13.46	0.745	0.1654	0.4359
0.875	0.083	10.54	0.709	0.2065	0.3948
0.875	0.095	9.21	0.685	0.2328	0.3685
0.875	0.109	8.03	0.657	0.2623	0.3390
0.875	0.120	7.29	0.635	0.2846	0.3167
1.000	0.028	35.71	0.944	0.0855	0.6999
1.000	0.035	28.57	0.930	0.1061	0.6793
1.000	0.049	20.41	0.902	0.1464	0.6390
1.000	0.065	15.38	0.870	0.1909	0.5945
1.000	0.083	12.05	0.834	0.2391	0.5463
1.000	0.095	10.53	0.810	0.2701	0.5153
1.000	0.109	9.17	0.782	0.3051	0.4803
1.000	0.120	8.33	0.760	0.3318	0.4536
1.000	0.134	7.46	0.732	0.3646	0.4208
1.250	0.035	35.71	1.180	0.1336	1.0936
1.250	0.049	25.51	1.152	0.1849	1.0423
1.250	0.065	19.23	1.120	0.2420	0.9852
1.250	0.083	15.06	1.084	0.304L3	0.9229
1.250	0.095	13.16	1.060	0.3447	0.8825
1.250	0.109	11.47	1.032	0.3907	0.8365
1.250	0.120	10.42	1.010	0.4260	0.8012
1.250	0.134	9.33	0.982	0.4698	0.7574
1.500	0.035	42.86	1.430	0.1611	1.6061
1.500	0.049	30.61	1.402	0.2234	1.5438
1.500	0.065	23.08	1.370	0.2930	1.4741
1.500	0.083	18.07	1.334	0.3695	1.3977
1.500	0.095	15.79	1.310	0.4193	1.3478
1.500	0.109	13.76	1.282	0.4763	1.2908
1.500	0.120	12.50	1.260	0.5202	1.2469
1.500	0.134	11.19	1.232	0.5750	1.1921
1.500	0.148	10.14	1.204	0.6286	1.1385
1.750	0.035	50.00	1.680	0.1886	2.2167
1.750	0.049	40.82	1.902	0.3003	2.8413
1.750	0.065	26.92	1.620	0.3441	2.0612
1.750	0.083	21.08	1.584	0.4347	1.9706
1.750	0.095	18.42	1.560	0.4939	1.9113
1.750	0.109	16.06	1.532	0.5619	1.8433
1.750	0.120	14.58	1.510	0.6145	1.7908
1.750	0.134	13.06	1.482	0.6803	1.7250
1.750	0.148	11.82	1.454	0.7449	1.6604
1.750	0.165	10.61	1.420	0.8216	1.5837
2.000	0.035	57.14	1.930	0.2161	2.9255
2.000	0.049	40.82	1.902	0.3003	2.8413
2.000	0.065	30.77	1.870	0.3951	2.7465
2.000	0.083	24.10	1.834	0.4999	2.6417
2.000	0.095	21.05	1.810	0.5685	2.5730
2.000	0.109	18.35	1.782	0.6475	2.4941
2.000	0.120	16.67	1.760	0.7087	2.4328
2.000	0.134	14.93	1.732	0.7855	2.3561
2.000	0.148	13.51	1.704	0.8611	2.2805
2.000	0.165	12.12	1.670	0.9512	2.1904

 

STAINLESS STEEL SANITARY TUBE SCHEDULE CHARt

NB SIZES	SCH 5	SCH 10	SCH 40	SCH 80	SCH 160
1/8″
1/4″
3/8″
1/2″
3/4″
1″
1 1/4″
1 1/2″
2″
2 1/2″
3″
4″
5″
6″

 

STAINLESS STEEL SANITARY TUBE PRESSURE RATING

AVE. WALL INCHES	MIN YIELD STRENGTH (PSI)	MIN TENSILE STRENGTH (PSI)	THEORETICAL BURST PRESSURE * (PSI)	WORKING PRESSURE (PSI) 25% OF BURST	THEORETICAL YIELD POINT ** (PSI)	COLLAPSE PRESSURE *** (PSI)
0.250	0.020	30,000	75,000	14,286	3,571	5,714	4,416
0.250	0.028	30,000	75,000	21,649	5,412	8,660	5,967
0.250	0.035	30,000	75,000	29,167	7,292	11,667	7,224
0.250	0.049	30,000	75,000	48,355	12,089	19,342	9,455
0.250	0.065	30,000	75,000	81,250	20,313	32,500	11,544
0.375	0.020	30,000	75,000	8,955	2,239	3,582	3,029
0.375	0.028	30,000	75,000	13,166	3,292	5,266	4,145
0.375	0.035	30,000	75,000	17,213	4,303	6,885	5,077
0.375	0.049	30,000	75,000	26,534	6,634	10,614	6,816
0.375	0.065	30,000	75,000	39,796	9,949	15,918	8,597
0.500	0.020	30,000	75,000	6,522	1,630	2,609	2,304
0.500	0.028	30,000	75,000	9,459	2,365	3,784	3,172
0.500	0.035	30,000	75,000	12,209	3,052	4,884	3,906
0.500	0.049	30,000	75,000	18,284	4,571	7,313	5,304
0.500	0.065	30,000	75,000	26,351	6,588	10,541	6,786
0.500	0.083	30,000	75,000	37,275	9,319	14,910	8,307
0.625	0.020	30,000	75,000	5,128	1,282	2,051	1,859
0.625	0.028	30,000	75,000	7,381	1,845	2,953	2,568
0.625	0.035	30,000	75,000	9,459	2,365	3,784	3,172
0.625	0.049	30,000	75,000	13,947	3,487	5,579	4,335
0.625	0.065	30,000	75,000	19,697	4,924	7,879	5,591
0.625	0.083	30,000	75,000	27,124	6,781	10,850	6,910
0.625	0.095	30,000	75,000	32,759	8,190	13,103	7,734
0.625	0.109	30,000	75,000	40,172	10,043	16,069	8,639
0.750	0.028	30,000	75,000	6,052	1,513	2,421	2,156
0.750	0.035	30,000	75,000	7,721	1,930	3,088	2,669
0.750	0.049	30,000	75,000	11,273	2,818	4,509	3,664
0.750	0.065	30,000	75,000	15,726	3,931	6,290	4,749
0.750	0.083	30,000	75,000	21,318	5,330	8,527	5,905
0.750	0.095	30,000	75,000	25,446	6,362	10,179	6,637
0.750	0.109	30,000	75,000	30,733	7,683	12,293	7,453
0.750	0.120	30,000	75,000	35,294	8,824	14,118	8,064
0.875	0.020	30,000	75,000	3,593	898	1,437	1,340
0.875	0.028	30,000	75,000	5,128	1,282	2,051	1,859
0.875	0.035	30,000	75,000	6,522	1,630	2,609	2,304
0.049	30,000	75,000	9,459	2,365	3,784	3,172
0.875	0.065	30,000	75,000	13,087	3,272	5,235	4,126
0.875	0.083	30,000	75,000	17,560	4,390	7,024	5,152
0.875	0.095	30,000	75,000	20,803	5,201	8,321	5,807
0.875	0.109	30,000	75,000	24,886	6,221	9,954	6,543
0.875	0.120	30,000	75,000	28,346	7,087	11,339	7,100
1.000	0.028	30,000	75,000	4,449	1,112	1,780	1,633
1.000	0.035	30,000	75,000	5,645	1,411	2,258	2,027
1.000	0.049	30,000	75,000	8,149	2,037	3,259	2,796
1.000	0.065	30,000	75,000	11,207	2,802	4,483	3,647
1.000	0.083	30,000	75,000	14,928	3,732	5,971	4,567
1.000	0.095	30,000	75,000	17,593	4,398	7,037	5,159
1.000	0.109	30,000	75,000	20,908	5,227	8,363	5,827
1.000	0.120	30,000	75,000	23,684	5,921	9,474	6,336
1.000	0.134	30,000	75,000	27,459	6,865	10,984	6,963
1.250	0.035	30,000	75,000	4,449	1,112	1,780	1,633
1.250	0.049	30,000	75,000	6,380	1,595	2,552	2,260

 

STAINLESS STEEL SANITARY TUBE DIMENSIONAL TOLERANCES

SIZE OD		NOMINAL WALL THICKNESS		OUTSIDE DIAMETER TOLERANCE		LENGTH TOLERANCE		WALL THICKNESS TOLERANCE
(in)	(mm)	(in)	(mm)	(in)	(mm)	(in)	(mm)	(%)
½	12.7	0.065	1.65	+/-0.005	+/-0.13	+⅛, -0	+3.18, -0	+/-10.0%
¾	19.1	0.065	1.65	+/-0.005	+/-0.13	+⅛, -0	+3.18, -0	+/-10.0%
1	25.4	0.065	1.65	+/-0.005	+/-0.13	+⅛, -0	+3.18, -0	+/-10.0%
1½	38.1	0.065	1.65	+/-0.008	+/-0.20	+⅛, -0	+3.18, -0	+/-10.0%
2	50.8	0.065	1.65	+/-0.008	+/-0.20	+⅛, -0	+3.18, -0	+/-10.0%
2½	63.5	0.065	1.65	+/-0.010	+/-0.25	+⅛, -0	+3.18, -0	+/-10.0%
3	76.2	0.065	1.65	+/-0.010	+/-0.25	+⅛, -0	+3.18, -0	+/-10.0%
4	101.6	0.083	2.11	+/-0.015	+/-0.38	+⅛, -0	+3.18, -0	+/-10.0%
6	152.4	0.109	2.77	+/-0.030	+/-0.76	+1, -0	+25.4, -0	+/-10.0%

 

Stainless Steel Sanitary Tube Chemical Composition

The below table shows the chemical composition of the used for Stainless Steel Sanitary Tube:

STAINLESS STEEL SANITARY TUBE GRADES	UNS	C	Mn	P	S	Si	Cr	Ni	Mo	Ti	Nb	N
TP304	S30400	0.08	2	0.045	0.03	1	18.0-20.0	8.0-11.0
TP304L	S30403	0.035	2	0.045	0.03	1	18.0-20.0	8.0-13.0
TP316	S3160	0.08	2	0.045	0.03	1	16.0-18.0	11.0-14.0	2.0-3.0
TP316L	S31603	0.035	2	0.045	0.03	1	16.0-18.0	10.0-14.0	2.0-3.0

 

Stainless Steel Sanitary Tube Mechanical Properties

Material	Heat	Temperure	Tensile Strength	Yield Strength	Elongation %, Min
	Treatment	Min.	Ksi (MPa), Min.	Ksi (MPa), Min.
		º F(º C)
TP304	Solution	1900 (1040)	75(515)	30(205)	35
TP304L	Solution	1900 (1040)	70(485)	25(170)	35
TP316	Solution	1900(1040)	75(515)	30(205)	35
TP316L	Solution	1900(1040)	70(485)	25(170)	35

 

Stainless Steel Sanitary Tubing Equivalent Grades

GRADE	UNS NO	DIN/WERKSTOFF
Stainless Steel Sanitary Tube 304	S30400	1.4301
Stainless Steel Sanitary Tube 304L	S30403	1.4306
Stainless Steel Sanitary Tube 316	S31600	1.4436
Stainless Steel Sanitary Tube 316L	S31603	1.4404