Project Description

  • S32707 1.4658 Duplex Stainless Steel Pipe and Tube

Commitment to You

We are committed to integrate steel resources in china and serve the global steel market. We have 15+ years of experience in steel researching, production, managing and sales.

Our ability to purchase materials directly from leading mills will give you the competitive edge. Any Questions Just Call +86-731-89903933

JIS G3463 Stainless Steel Boiler and Heat Exchanger Tubes

the tubes used for exchanging heat on the inside and outside of the tube, such as superheater tubes of boiler, and heat exchanger tubes, condenser tubes, catalysis tubes, etc. used in chemical and petroleum industries. However, it is not applicable to the heating furnace tube.

JIS G3463 stainless tube supply

Hot finished seamless tube : -S-H

Cold finished seamless tube: -S-C

Automatic arc welded tube : -A

Cold finished automatic arc welded tube : -A-C

Weld zone work-finished automatic arc welded tube : -A-B

Laser welded tube : -L

Cold finished laser welded tube : -L-C

Weld zone work-finished laser welded tube : -L-B

Electric resistance welded tube other than hot finished or cold finished ones : -E-G

Cold finished electric resistance welded tube : -E-C

JIS G3463 Stainless Steel Tube & Pipe Sizes Supply

Hot Rolled Process – OD 30-500mm ; WT 3-60mm ; L 6-12meter

Cold Drawn Process – OD 10-200mm ; WT 0.5-20mm ; L 1-12meter

Cold Rolled Process – OD 6-200mm ; WT 0.1-20mm ; L 1-12meter

JIS G3463 Chemical Component

Symbol of grade C Si Mn P S Ni Cr Mo
SUS3O4TB 0.08 max. 1.00 max. 2.00 max. 0.040 max. 0.030 max. 8.00 to 11 18.00 to 20 /
SUS304HTB 0.04 to 0.1 0.75 max. 2.00 max. 0.040 max. 0.030 max. 8.00 to 11 18.00 to 20 /
SUS304LTB 0.03 max 1.00 max. 2.00 max. 0.040 max. 0.030 max. 9.00 to 13 18.00 to 20 /
SUS309TB 0.15 max. 1.00 max. 2.00 max. 0.040 max. 0.030 max. 12.00 to 15 22.00 to 24 /
SUS309STB 0.08 max. 1.00 max. 2.00 max. 0.040 max. 0.030 max. 12.00 to 15 22.00 to 24 /
SUS310TB 0.15 max. 1.50 max. 2.00 max. 0.040 max 0.030 max. 19.00 to 22 24.00 to 26 /
SUS310STB 0.08 max. 1.50 max. 2.00 max. 0.040 max. 0.030 max. 19.00 to 22 24.00 to 26 /
SUS316TB 0.08 max. 1.00 max. 2.00 max. 0.040 max. 0.030 max. 10.00 to 14 16.00 to 18 2.00 to 3.00
SUS316HTB 0.04 to 0.10 0.75 max. 2.00 max. 0.030 max. 0.030 max. 11.00 to 14 16.00 to 18 2.00 to 3.00
SUS316LTB 0.03 max 1.00 max. 2.00 max. 0.040 max. 0.030 max. 12.00 to 16.00 16.00 to 18.00 2.00 to 3.00
SUS316T1TB 0.08 max. 1.00 max. 2.00 max. 0.040 max. 0.030 max. 10.00 to 14 16.00 to 18.00 2.00 to 3.00
SUS317TB 0.08 max. 1.00 max. 2.00 max. 0.040 max. 0.030 max. 11.00 to 15 18.00 to 20 3.00 to 4
SUS317LTB 0.03 max 1.00 max. 2.00 max. 0.040 max. 0.030 max. 11.00 to 15 18.00 to 20 3.00 to 4
SUS836LTB 0.03 max 1.00 max. 2.00 max. 0.040 max. 0.030 max. 24.00 to 26 19.00 to 24 5.00 to 7
SUS890LTB 0.02 max 1.00 max. 2.00 max. 0.040 max. 0.030 max. 23.00 to 28 19.00 to 23 4.00 to 5
SUS321TB 0.08 max. 1.00 max. 2.00 max. 0.040 max. 0.030 max. 9.00 to 13 17.00 to 19 /
SUS321HTB 0.04 to 0.10 0.75 max. 2.00 max. 0.030 max. 0.030 max. 9.00 to 13 17.00 to 20.00 /
SUS436LTB 0.025 max. 1.00 max. 1.00 maxe 0.040 max. 0.030 max. / 16.00 to 19 0.75 to 1.25
SUS444TB 0.025 max. 1.00 max. 1.00 max. 0.040 max. 0. 030 max / 17.00 to 20.00 1.75 to 2.5
SUSXM8TB 0.08 max. 1.00 max. 1.00 max. 0.040 max. 0.030 max. / 17.00 to 19 /
SUSXM27TB 0.01 max 0.40 max. 0.40 max. 0.030 max. 0.020 max. / 25.00 to 27.5 0.75 to 1.5

JIS G3463 Method of manufacture

(1) The tube shall be manufactured by seamless process,or by automatic arc welding,laser welding or electric resistance welding process.

(2) The tube shall be heat-treated as specified. However,heat treatments not specified shall be subjected to the agreement between the purchaser and supplier.

(3) The tube shall be adequately treated to remove the oxide film that may adversely affect inspection.

JIS G3463 Appearance

The appearance shall be as follows.

(1) The tube shall be practically straight and its both ends shall be at right angles to the axis of the tube.

(2) The inside and outside surfaces of the tube shall be well-finished and free from defects injurious to use.

JIS G3463 Test and Inspection

Hydraulic test

Chemical analysis

Tensile test at room temperature

Tensile test at elevated temperature

impact test at room temperature

impact test at low temperature

flattening test

ring tensile test

drift expending test

ring expanding test

leak tightness test

eddy current test

ultrasonic test

magnetic flux leakage test

JIS G3463 Marking and Packages

In addition to the marking prescribed in specification as client’s request.

Bare / Nylon / Plastic / Wooden Case

We also can supply other kinds of:

Seamless Stainless Steel Pipe&Tube

Welded Stainless Steel Pipe&Tube

U Type Stainless Steel Pipe&Tube

Coil Type Stainless Steel Pipe&Tube(Max 300meter),seamless or welded

Annealed Pickled AP Stainless Steel Pipe&Tube(Ra≤2.5μm)

Bright Annealed BA Stainless Steel Pipe&Tube(Ra≤0.8μm)

Mechanical Polished MP Stainless Steel Pipe&Tube(Ra≤0.8μm)

Electro Polished EP Stainless Steel Pipe&Tube(Ra≤0.25μm)

Sanitary Stainless Steel Pipe&Tube

Capillary Stainless Steel Pipe&Tube

Instrument Stainless Steel Pipe&Tube

Contact Fushun JIS G3463 Today

Contact us for more information regarding precision steel tubing specifications and product options, or request a quote for further pricing details today.

Experienced 15+ Years

Our ability to purchase materials directly from leading mills at the best possible price will give you the competitive edge. This coupled with a skilled workforce dedicated to embracing the demands of the markets.

We Can Supply Follows Products with High Quality:

  1. Cold Rolled Steel Tube
  2. Cold Drawn Steel Tube
  3. Hollow Bar
  4. Honed Tube
  5. Plated Tube
  6. Plated Bar
  7. Boiler Tube

All Products According Quality Standard Strictly:

  1. ASTM: ASTM A519, ASTM A513.
  2. JIS:JIS G3441, JIS G3445, JIS G3466, JIS G3459.
  3. DIN: DIN1626, DIN1629, DIN2391, DIN2393, DIN2448, DIN2458.
  4. EN: EN10305.
  5. BS: BS6323.

Wide Range of Pipes to Fit Your Industry:

  1. OD from 5mm to 820mm.
  2. Wall Thickness from 0.1 to 100mm.
  3. Length up to 50mtr per pc.

    Your Name *

    Your Email *

    Company Name

    Phone Number *

    Further Information

    Can’t Find What You Looking for? Check Popular Items Blew.

    Direct from the Source and Deliver to You in a Very Fast and Efficient Timeframe.