Project Description
Commitment to You
We are committed to integrate steel resources in china and serve the global steel market. We have 15+ years of experience in steel researching, production, managing and sales.
Our ability to purchase materials directly from leading mills will give you the competitive edge. Any Questions Just Call +86-731-89903933
Fushun is one of reputed ASTM A270 Sanitary Tube supplier, we supply these after all quality parameters checks by experienced and good knowledge staff.We stocks a wide range of industry standard sizes of both seamless and welded stainless steel pipe. Our offered ASTM A270 Tubing in sizes up to and including 12 inch [300 mm] in outside diameter. These ASTM A270 austenitic stainless steel sanitary tube intended for use in the dairy and food industry and having special surface finishes. ASTM A270 sanitary stainless pipe usually refers to the small pipe diameters, normally from 1/2 inch to 2 1/2 inch, thickness from 0.049 inch (1.24mm) to 0.15 inch (3.81mm). The maximum outer diameter of ASTM A270 Pipe is 12 inches (201.8 mm). ASTM A270 Tubing wall thickness tolerance shall not vary more than 12.5%. ASTM A270 tube using inch pound as the standard unit of measure. Our stock of ASTM A270 Stainless Steel Seamless Tubes and ASTM A270 Welded Tubing primarily consists of the austenitic 304, 304L, 316 and 316L grade in annealed and pickled, 2B finish, bright annealed, mill finish and polished conditions.Our high quality steel tubes, good customer service, and in house pipes and tubes processing capabilities have made us one of the emerging suppliers of ASTM A270 Stainless Steel Tubing and ASTM A270 Stainless Steel Welded Sanitary Tubing. Our offered ASTM A270 Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing. Trilok Steel Industries is privately owned supplier and exporter of ASME SA270 tubing in cities like Chennai, Delhi, Bangalore, Ludhiana, Bhosari, Ahmedabad, Vadodara (Gujarat), Rajkot, Ghaziabad, Pune. These ASTM A270 Tubes supply after mechanical tests like hydrostatic test or nondestructive electric test, reverse flattening test. Also, each Tubo ASTM A270 surface finishes may be specified: mill finish, mechanically polished surface finish, finish No. 80, electropolished finish, finish No. 120, finish No. 180, finish No. 240, and maximum roughness average surface finish. Trilok Steel Industries is India’s largest distributors of ASTM A270 Material includes ASTM A270 Sanitary Tube, ASTM A270 Stainless Steel Sanitary Tubing, ASTM A270 Stainless steel Sanitary tube, ASTM A270 Sanitary Tubing in custom-made shapes and sizes as per the requirements given by our clients present
ASTM A270 Sanitary stainless steel tubing specification
ASTM A270 sanitary (hygienic) stainless steel tubing is the standard specification for the welded seamless, and heavily cold worked welded austenitic and ferritic stainless steel sanitary tubing. It includes the stainless steel tube types in seamless and welded ERW, EFW. ASTM A270 sanitary tubing intended applied in the diary and food industry, bio processing equipment, and having special surface finish.
View here for about information about ASTM A270 Standard Specification.
ASTM A270 stainless steel tube size range
ASTM A270 sanitary stainless pipe usually refers to the small pipe diameters, normally from 1/2” to 2 1/2”, thickness from 0.049 in (1.24mm) to 0.15 in (3.81mm).
The maximum outer diameter of ASTM A270 tubing is 12 inches (304.8 mm).
ASTM A270 tubing using inch-pound as the standard unit of measure.
Wall thickness tolerance shall not vary more than 12.5%.
Referred standard for ASTM A270 sanitary tubing
ASTM A 262: Methods of detecting intergranular corrosion for the magnetization coefficient.
ASTM A 480/A 480 M is the general specifications for flat stainless steel, heat-resistant stainless steel plate, sheet and steel bars.
ASTM A 923 Test methods for detecting detrimental intermetallic phase in duplex austenitic/ferritic stainless steels
ASTM A 967 is the specification of passivation treatment for stainless parts .
ASTM A 1016/1016 M is the general specification for ferritic alloy steel, austenitic alloy steel and stainless steel.
E 527 is the test methods for numbering metal and alloy
ASTM B 46.1 surface structure (surface roughness, waviness and layers).
ASME boiler and pressure vessel’s numbers and other standards.
Stainless tube manufacturing processes
ASTM A270 sanitary stainless steel pipe shall be noted below points during manufacturing processes:
1) Seamless steel pipe should not contains any kind of welding processing.
2) Welded steel pipe applied in automatic welding processing, but should not use metal materials as filler.
3) Heavily cold worked (HCW) tubes shall be manufactured by cold working of not less than 35% reduction of thickness of both wall and weld to a welded pipe prior to the final anneal. Filler materials shall be noted added during welding process. The weld shall be 100% radio graphically inspected in accordance with ASME boiler and pressure vessel standards specification.
4) Sanitary pipe could be furnished with hot finished or cold finished at Manufacture’s option.
Hot-treatment methods for ASTM A270 stainless tube
All materials should supply after hot-treatment. Except the for duplex stainless steel materials S31803, S32003, S320205, S32750, N08926 and N08367, in these cases it shall consist of heating the material to a minimum temperature of 1900 ℉ (1040 ℃) and quenching in water or rapid cooling by other means.
CHEMICAL COMPOSITION
A little part of flat or steel pipe shall be taken for chemical analysis. The composition should meet the ASTM A270 standard table 1.
Table 1:
MECHANICAL TESTS
Mechanical tests includes negative flattening test, hydrostatic or nondestructive electric test. Mechanical strength shall be complied with ASTM A270 standard specification table 2.
Table 2:
TOLERANCES
SURFACE REQUIREMENTS
Surface of rolled products: No need extra polishing or smooth treatment.
Mill Finish— A finish without additional polishing oroperations intended to smooth the surface.
Mechanical polished surface: Purchasers according the same numbering abrasive (grinding stuff) to polish the products get the required products’ surface:
Finish No. 80 – A ground finish produced by polishing a tube with an abrasive media impregnated with No. 80 grit.
Finish No. 120 – No. 120 grit.
Finish No. 180 – No. 180 grit.
Finish No. 240 – No. 240 grit.
Other mechanically polished finishes may beagreed upon between the purchaser and manufacturer
Electrolytic polishing of the surface: Before this processing, manufacturer could use other ways to polish products.
The maximum average of roughness: Customers could specify the maximum roughness of internal surface, external surface and both surface.
Surface furnishment also could be decided by manufacturer or purchaser.
Normally surface treatment: Internal, External, SF4, SF3, etc.
MARKS
At last, the mark should furnished in accordance with A 1016/A1016M, and specified in the order. Includes the sanitary stainless steel pipe manufactured in Seamless (SML), Welded (WLD) or heavily cold worked (HCW).
PACKAGE
Before delivery, all steel pipes should bundled well, and covered by paper, cloths. Or packed in box by manufacturer.
ADDITIONAL REQUIREMENTS
In case specified in the order, intergranular corrosion tests shall be performed by manufacturer on specimens representative of the as-shipped condition. Sanitary stainless steel pipe and tube shall be capable of passing corrosion tests in the as-shipped condition. For austenite alloy steel should meets the Practice E of the standard A262 , and for duplex alloy steels (S31803, S32205 and A32750) should meets experiment C of Test Methods A 923.
In case the ASTM A270 stainless steel pipe for pharmaceutical quality applications, it is more strict on the chemicals, strengths and size tolerances.
ASTM A270 covers grades of seamless, welded, and heavily cold worked austenitic and ferritic/austenitic stainless-steel sanitary tubing. Seamless tubes shall be manufactured by a process that does not involve welding at any stage. Welded tubes shall be made using an automated welding process with no addition of filler metal during the welding process. Heavily cold worked tubes shall be made by applying cold working of not less than 35% reduction of thickness of both wall and weld to a welded tube prior to the final anneal. No filler shall be used in making the weld.
All material shall be furnished in the heat-treated condition. A chemical analysis of either one length of flat-rolled stock or one tube shall be made for each heat. Each tube shall be subjected to mechanical tests like reverse flattening test, hydrostatic test or nondestructive electric test.
The following surface finishes may be specified: mill finish, mechanically polished surface finish, finish No. 80, finish No. 120, finish No. 180, finish No. 240, electropolished finish, and maximum roughness average surface finish. Longitudinally polished finish shall be performed on the inside surface only while a circumferential polished finish shall be done on either the inside surface, outside surface, or both.
ASTM A270 A270M sanitary tube is ideal for the dairy, food and beverage industries where the highest degree of purity and cleanliness is essential. It is certified to the requirements of ASTM A270, 3A standards and most user specifications.
We stock all sanitary tube sizes from 1/2” (12.7 mm) to 8” (203.2 mm) OD in 20 ft. standard lengths. Custom lengths and sizes are available upon request.
ASTM A270 A270M ASME SA270 Grades TP304L and TP316L available from stock. Other grades are available upon request.
Standard: ASTM A270.
Description Name: ASTM A270 Sanitary Stainless-steel tubing, Seamless Sanitary stainless tubes, Seamless Sanitary stainless pipes, Welded Sanitary stainless tubes, Welded Sanitary stainless pipes,
TP304L Sanitary stainless tubes, TP304L sanitary stainless pipes, TP316L Sanitary stainless tubes, TP316L Sanitary stainless pipes.
Dimensional Tolerance
OD Size | Nominal wall | Outside Dia | Length | Wall |
1/2″ (12.7) | 0.065″ (1.65) | +/-0.005 (0.13) | +1/8″ (3.18)/-0 | +/-10% |
3/4″ (19.1) | 0.065″ (1.65) | +/-0.005 (0.13) | +1/8″ (3.18)/-0 | +/-10% |
1″ (25.4) | 0.065″ (1.65) | +/-0.005 (0.13) | +1/8″ (3.18)/-0 | +/-10% |
1-1/2″ (38.1) | 0.065″ (1.65) | +/-0.008 (0.20) | +1/8″ (3.18)/-0 | +/-10% |
2″ (50.8) | 0.065″ (1.65) | +/-0.008 (0.20) | +1/8″ (3.18)/-0 | +/-10% |
2-1/2″ (63.5) | 0.065″ (1.65) | +/-0.010 (0.25) | +1/8″ (3.18)/-0 | +/-10% |
3″ (76.2) | 0.065″ (1.65) | +/-0.010 (0.25) | +1/8″ (3.18)/-0 | +/-10% |
4″ (101.6) | 0.083″ (2.11) | +/-0.015 (0.38) | +1/8″ (3.18)/-0 | +/-10% |
6″ (152.4) | 0.109″ (2.77) | +/-0.030 (0.76) | +3/16″ (4.76)/-0 | +/-10% |
8″ (203.2) | 0.109″ (2.77) | +/-0.030 (0.76) | +3/16″ (4.76)/-0 | +/-10% |
Chemical Composition:
Grade | UNS
Design |
Composition, % | ||||||||||||||
C | Mn | P | S | Si | Cr | Ni | Mb | Ti | Nb | N | Cu | Ce | B | Al | ||
TP304 | S30400 | 0.08 | 2 | 0.045 | 0.03 | 1 | 18.0–20 | 8.0–11 | . . . | . . . | . . . | . . . | . . . | . . . | ||
TP304L | S30403 | 0.035 | 2 | 0.045 | 0.03 | 1 | 18.0–20 | 8.0–13 | . . . | . . . | . . . | . . . | . . . | . . . | ||
TP316 | S31600 | 0.08 | 2 | 0.045 | 0.03 | 1 | 16.0–18 | 10.0–14 | 2.00–3 | . . . | . . . | . . . | . . . | . . . | ||
TP316L | S31603 | 0.035 | 2 | 0.045 | 0.03 | 1 | 16.0–18 | 10.0–14 | 2.00–3 | . . . | . . . | . . . | . . . | . . . | ||
TP321 | S32100 | 0.08 | 2 | 0.045 | 0.03 | 1 | 17.0–19 | 9.0–12 | . . . | Ti 5 × (C+N) min, 0.70 max | . . . | 0.1 | . . . | . . . |
Quality and Mechanical Tests:
To assure the highest quality standards, the tubing is subjected to extensive testing and inspection programs that meet or exceed ASTM A270 A1016 A1016M test requirements. Testing includes reverse bend, reverse flattening, and flange tests. Eddy current testing is performed on 100% of the sanitary tube produced.
Heat Treatment (Annealing):
Inline hydrogen bright annealing to 1900°F (1040° C) minimum followed with a rapid quench.
Surface Finishes
Surface finish is 20 µ-in Ra (0.5 µm) ID maximum, 30 µ-in Ra (0.8 µm) OD maximum surface roughness measured per ASME ANSI B46.1 with the profilometer reading at 90 degrees to the lay. Other finishes available upon request.
Flattening Test
For material heat treated in a continuous furnace flattening tests shall be made on a sufficient number of pipes to constitute 5 % of the lot, but in no case less than 2 lengths of pipe.
Markings
Bright annealed tubing is line–stenciled with OD, wall, ASTM specifications, size, grade, heat number, production date and time. OD polished tube is marked on one end of each tube with a removable label stating ASTM specification, manufacturer, grade and heat number. Continuous line stencil available on request.
Note:
Mill test certificates will be issued according to EN10204.3
All tubes shall be supplied as per applicable ASTM A270 /A270M Specification.
ASTM A270 STAINLESS STEEL SANITARY TUBE SPECIFICATION
ASTM A270 Tubing Type | Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing |
ASTM A270 Tube OD. | 1/2” |
ASTM A270 Tube Wall | 16 Gauge (0.065”) |
ASTM A270 Tube Length | 20′ |
ASTM A270 Tube OD Tolerance | +/-0.005” / +/-0.13MM |
ASTM A270 Tube WT Tolerance | +/-10% |
ASTM A270 Tube Length Tolerance | +1/8” / +3.18MM |
ASTM A270 Tube Material | SS 304, SS 304L,SS 316,SS 316L |
ASTM A270 Tube Standard | 3A / ASTM A270 / A270M |
ASTM A270 Tube Finish | 2B MIll Finish , No.4 finish, BA Finish, 400 Grit Finish, 550 Grit Finish, 600 Grit Finish |
ASTM A270 Tube Polish | Mechanical Polished |
ASTM A270 Tube Type | Seamless |
ASTM A270 Tube Certification | 3A – Food / Dairy Grade |
ASTM A270 Tube Mill Test Certificate | EN10204 3.1 |
ASTM A270 Product | ASTM A270 Sanitary Tubing, ASTM A270 Seamless Sanitary Tubes, ASTM A270 Tubing, ASTM A270 Welded Sanitary Tubing, ASTM A270 Welded Sanitary Tubes, ASTM A270 Stainless Steel Sanitary Tubing |
ASTM A270 Tube Packing | Sleeved, Ends Capped, Wooden Boxe |
ASTM A270 sanitary stainless steel pipe shall be noted below points during manufacturing processes:
1)ASTM A270 Seamless steel pipe should not contains any kind of welding processing.
2) ASTM A270 Welded steel pipe applied in automatic welding processing, but should not use metal materials as filler.
3) ASTM A270 Heavily cold worked (HCW) tubes shall be manufactured by cold working of not less than 35% reduction of thickness of both wall and weld to a welded pipe prior to the final anneal. Filler materials shall be noted added during welding process. The weld shall be 100% radio graphically inspected in accordance with ASME boiler and pressure vessel standards specification.
4) ASTM A270 Sanitary pipe could be furnished with hot finished or cold finished at Manufacture’s option.
Hot-treatment methods for ASTM A270 stainless tube
All materials should supply after hot-treatment. Except the for duplex stainless steel materials S31803, S32003, S320205, S32750, N08926 and N08367, in these cases it shall consist of heating the material to a minimum temperature of 1900 ℉ (1040 ℃) and quenching in water or rapid cooling by other means.
ASTM A270 Sanitary Tubing Surface Requirements
Surface of rolled products: No need extra polishing or smooth treatment.
Mechanical polished surface: Purchasers according the same numbering abrasive (grinding stuff) to polish the products get the required products’ surface.
Electrolytic polishing of the surface: Before this processing, manufacturer could use other ways to polish products.
The maximum average of roughness: Customers could specify the maximum roughness of internal surface, external surface and both surface.
Normally surface treatment: Internal, External, SF4, SF3, etc.
ASTM A270 Sanitary Tubing Marking
At last, the mark should furnished in accordance with A 1016/A1016M, and specified in the order. Includes the sanitary stainless steel pipe manufactured in Seamless (SML), Welded (WLD) or heavily cold worked (HCW).
ASTM A270 STAINLESS STEEL TUBES STOCK SUPPLY APPLICATIONS
These ASTM A270 stainless steel tube grades are sold to a wide range of industries/markets, due to their overall corrosion resistance and good machinability:
ASTM A270 stainless steel tube for Chemical and petrochemical
ASTM A270 Stainless steel seamless tube used for Power generation
ASTM A270 Stainless steel tube for Renewable energy
ASTM A270 Seamless Stainless Steel tube for Pulp and Paper
ASTM A270 Stainless Steel tubing for Process piping
ASTM A270 Seamless Stainless Steel tube used for Pharmaceutical
ASTM A270 Stainless Steel tube applications for Food and beverage
ASTM A270 Stainless Steel tube used for Oil and gas
ASTM A270 Stainless Steel tube applications in Mining
ASTM A270 Stainless Steel tube used for Water/waste
ASTM A270 Stainless steel tube application for Marine Industry
ASTM A270 Seamless tube application for Fertilizers
ASTM A270 Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing. Covers grades of seamless, welded, and heavily cold worked austenitic and ferritic/austenitic duplex stainless steel sanitary tubing. Seamless tubes shall be manufactured by a process that does not involve welding at any stage. Welded tubes shall be made using an automated welding process with no addition of filler metal during the welding process. Heavily cold worked tubes shall be made by applying cold working of not less than 35% reduction of thickness of both wall and weld to a welded tube prior to the final anneal. No filler shall be used in making the weld.
All material shall be furnished in the heat-treated condition. A chemical analysis of either one length of flat-rolled stock or one tube shall be made for each heat. Each tube shall be subjected to mechanical tests like reverse flattening test, hydrostatic test or nondestructive electric test. The following surface finishes may be specified: mill finish, mechanically polished surface finish, finish No. 80, finish No. 120, finish No. 180, finish No. 240, electropolished finish, and maximum roughness average surface finish. Longitudinally polished finish shall be performed on the inside surface only while a circumferential polished finish shall be done on either the inside surface, outside surface, or both.
This specification covers grades of seamless, welded, and heavily cold worked welded austenitic and ferritic/austenitic stainless steel sanitary tubing intended for use in the dairy and food industry and having special surface finishes. Pharmaceutical quality may be requested, as a supplementary requirement.
This specification covers tubes in sizes up to and including 12 in. [300 mm] in outside diameter.
The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
ASTM A270 Tube Dimension And Weights
ASTM A270 Tube OD | Product Type | Thickness |
1/2 | ASTM A270 Sanitary Tubing | 0.065 |
1/2 | ASTM A270 Sanitary Tubing | 0.065 |
3/4 | ASTM A270 Sanitary Tubing | 0.065 |
3/4 | ASTM A270 Sanitary Tubing | 0.065 |
1 | ASTM A270 Sanitary Tubing | 0.065 |
1 | ASTM A270 Sanitary Tubing | 0.065 |
1 1/2 | ASTM A270 Sanitary Tubing | 0.065 |
1 1/2 | ASTM A270 Sanitary Tubing | 0.065 |
2 | ASTM A270 Sanitary Tubing | 0.065 |
2 | ASTM A270 Sanitary Tubing | 0.065 |
2 1/2 | ASTM A270 Sanitary Tubing | 0.065 |
2 1/2 | ASTM A270 Sanitary Tubing | 0.065 |
3 | ASTM A270 Sanitary Tubing | 0.065 |
3 | ASTM A270 Sanitary Tubing | 0.065 |
4 | ASTM A270 Sanitary Tubing | 0.083 |
4 | ASTM A270 Sanitary Tubing | 0.083 |
6 | ASTM A270 Sanitary Tubing | 0.109 |
6 | ASTM A270 Sanitary Tubing | 0.109 |
8 | ASTM A270 Sanitary Tubing | 0.109 |
8 | ASTM A270 Sanitary Tubing | 0.109 |
TUBE PRESSURE RATING FOR ASTM A270
OD inches | Ave. Wall inches | Min Yield Strength (PSI) | Min Tensile Strength (PSI) | Theoretical Burst Pressure * (PSI) | Working Pressure (PSI) 25% of Burst | Theoretical Yield Point ** (PSI) | Collapse Pressure *** (PSI) | |
ASME SA270 Tubes | 0.250 | 0.020 | 30,000 | 75,000 | 14,286 | 3,571 | 5,714 | 4,416 |
ASME SA270 Tubes | 0.250 | 0.028 | 30,000 | 75,000 | 21,649 | 5,412 | 8,660 | 5,967 |
ASME SA270 Tube | 0.250 | 0.035 | 30,000 | 75,000 | 29,167 | 7,292 | 11,667 | 7,224 |
ASME SA270 Tube | 0.250 | 0.049 | 30,000 | 75,000 | 48,355 | 12,089 | 19,342 | 9,455 |
ASME SA270 Tube | 0.250 | 0.065 | 30,000 | 75,000 | 81,250 | 20,313 | 32,500 | 11,544 |
ASME SA270 Tube | 0.375 | 0.020 | 30,000 | 75,000 | 8,955 | 2,239 | 3,582 | 3,029 |
ASME SA270 Tube | 0.375 | 0.028 | 30,000 | 75,000 | 13,166 | 3,292 | 5,266 | 4,145 |
ASME SA270 Tube | 0.375 | 0.035 | 30,000 | 75,000 | 17,213 | 4,303 | 6,885 | 5,077 |
ASME SA270 Tube | 0.375 | 0.049 | 30,000 | 75,000 | 26,534 | 6,634 | 10,614 | 6,816 |
ASME SA270 Tube | 0.375 | 0.065 | 30,000 | 75,000 | 39,796 | 9,949 | 15,918 | 8,597 |
ASME SA270 Tube | 0.500 | 0.020 | 30,000 | 75,000 | 6,522 | 1,630 | 2,609 | 2,201 |
ASME SA270 Tube | 0.500 | 0.028 | 30,000 | 75,000 | 9,459 | 2,365 | 3,784 | 3,172 |
ASME SA270 Tube | 0.500 | 0.035 | 30,000 | 75,000 | 12,209 | 3,052 | 4,884 | 3,906 |
ASME SA270 Tube | 0.500 | 0.049 | 30,000 | 75,000 | 18,284 | 4,571 | 7,313 | 5,201 |
ASME SA270 Tube | 0.500 | 0.065 | 30,000 | 75,000 | 26,351 | 6,588 | 10,541 | 6,786 |
ASME SA270 Tube | 0.500 | 0.083 | 30,000 | 75,000 | 37,275 | 9,319 | 14,910 | 8,307 |
ASME SA270 Tube | 0.625 | 0.020 | 30,000 | 75,000 | 5,128 | 1,282 | 2,051 | 1,859 |
ASME SA270 Tube | 0.625 | 0.028 | 30,000 | 75,000 | 7,381 | 1,845 | 2,953 | 2,568 |
ASME SA270 Tube | 0.625 | 0.035 | 30,000 | 75,000 | 9,459 | 2,365 | 3,784 | 3,172 |
ASME SA270 Tube | 0.625 | 0.049 | 30,000 | 75,000 | 13,947 | 3,487 | 5,579 | 4,335 |
ASME SA270 Tube | 0.625 | 0.065 | 30,000 | 75,000 | 19,697 | 4,924 | 7,879 | 5,591 |
ASME SA270 Tube | 0.625 | 0.083 | 30,000 | 75,000 | 27,124 | 6,781 | 10,850 | 6,910 |
ASME SA270 Tube | 0.625 | 0.095 | 30,000 | 75,000 | 32,759 | 8,190 | 13,103 | 7,734 |
ASME SA270 Tube | 0.625 | 0.109 | 30,000 | 75,000 | 40,172 | 10,043 | 16,069 | 8,639 |
ASME SA270 Tube | 0.750 | 0.028 | 30,000 | 75,000 | 6,052 | 1,513 | 2,421 | 2,156 |
ASME SA270 Tube | 0.750 | 0.035 | 30,000 | 75,000 | 7,721 | 1,930 | 3,088 | 2,669 |
ASME SA270 Tube | 0.750 | 0.049 | 30,000 | 75,000 | 11,273 | 2,818 | 4,509 | 3,664 |
ASME SA270 Tube | 0.750 | 0.065 | 30,000 | 75,000 | 15,726 | 3,931 | 6,290 | 4,749 |
ASME SA270 Tube | 0.750 | 0.083 | 30,000 | 75,000 | 21,318 | 5,330 | 8,527 | 5,905 |
ASME SA270 Tube | 0.750 | 0.095 | 30,000 | 75,000 | 25,446 | 6,362 | 10,179 | 6,637 |
ASME SA270 Tube | 0.750 | 0.109 | 30,000 | 75,000 | 30,733 | 7,683 | 12,293 | 7,453 |
ASME SA270 Tube | 0.750 | 0.120 | 30,000 | 75,000 | 35,294 | 8,824 | 14,118 | 8,064 |
ASTM A270 Tube | 0.875 | 0.020 | 30,000 | 75,000 | 3,593 | 898 | 1,437 | 1,340 |
ASME SA270 Tube | 0.875 | 0.028 | 30,000 | 75,000 | 5,128 | 1,282 | 2,051 | 1,859 |
ASME SA270 Tube | 0.875 | 0.035 | 30,000 | 75,000 | 6,522 | 1,630 | 2,609 | 2,201 |
ASTM A270 Tube | 0.875 | 0.049 | 30,000 | 75,000 | 9,459 | 2,365 | 3,784 | 3,172 |
ASME SA270 Tube | 0.875 | 0.065 | 30,000 | 75,000 | 13,087 | 3,272 | 5,235 | 4,126 |
ASME SA270 Tube | 0.875 | 0.083 | 30,000 | 75,000 | 17,560 | 4,390 | 7,024 | 5,152 |
ASME SA270 Tube | 0.875 | 0.095 | 30,000 | 75,000 | 20,803 | 5,201 | 8,321 | 5,807 |
ASME SA270 Tube | 0.875 | 0.109 | 30,000 | 75,000 | 24,886 | 6,221 | 9,954 | 6,543 |
ASME SA270 Tube | 0.875 | 0.120 | 30,000 | 75,000 | 28,346 | 7,087 | 11,339 | 7,100 |
ASME SA270 Tube | 1.000 | 0.028 | 30,000 | 75,000 | 4,449 | 1,112 | 1,780 | 1,633 |
ASME SA270 Tube | 1.000 | 0.035 | 30,000 | 75,000 | 5,645 | 1,411 | 2,258 | 2,027 |
ASME SA270 Tubes | 1.000 | 0.049 | 30,000 | 75,000 | 8,149 | 2,037 | 3,259 | 2,796 |
ASME SA270 Tubes | 1.000 | 0.065 | 30,000 | 75,000 | 11,207 | 2,802 | 4,483 | 3,647 |
ASME SA270 Tubes | 1.000 | 0.083 | 30,000 | 75,000 | 14,928 | 3,732 | 5,971 | 4,567 |
ASME SA270 Tubes | 1.000 | 0.095 | 30,000 | 75,000 | 17,593 | 4,398 | 7,037 | 5,159 |
ASME SA270 Tubes | 1.000 | 0.109 | 30,000 | 75,000 | 20,908 | 5,227 | 8,363 | 5,827 |
ASME SA270 Tubes | 1.000 | 0.120 | 30,000 | 75,000 | 23,684 | 5,921 | 9,474 | 6,336 |
ASME SA270 Tubes | 1.000 | 0.134 | 30,000 | 75,000 | 27,459 | 6,865 | 10,984 | 6,963 |
ASME SA270 Tubes | 1.250 | 0.035 | 30,000 | 75,000 | 4,449 | 1,112 | 1,780 | 1,633 |
ASME SA270 Tubes | 1.250 | 0.049 | 30,000 | 75,000 | 6,380 | 1,595 | 2,552 | 2,260 |
ASME SA270 Tubes | 1.250 | 0.065 | 30,000 | 75,000 | 8,705 | 2,176 | 3,482 | 2,958 |
ASME SA270 Tubes | 1.250 | 0.083 | 30,000 | 75,000 | 11,485 | 2,871 | 4,594 | 3,719 |
ASME SA270 Tubes | 1.250 | 0.095 | 30,000 | 75,000 | 13,443 | 3,361 | 5,377 | 4,213 |
ASME SA270 Tubes | 1.250 | 0.109 | 30,000 | 75,000 | 15,843 | 3,961 | 6,337 | 4,776 |
ASME SA270 Tubes | 1.250 | 0.120 | 30,000 | 75,000 | 17,822 | 4,455 | 7,129 | 5,207 |
ASME SA270 Tubes | 1.250 | 0.134 | 30,000 | 75,000 | 20,468 | 5,117 | 8,187 | 5,742 |
ASME SA270 Tubes | 1.500 | 0.035 | 30,000 | 75,000 | 3,671 | 918 | 1,469 | 1,367 |
ASME SA270 Tubes | 1.500 | 0.049 | 30,000 | 75,000 | 5,243 | 1,311 | 2,097 | 1,896 |
ASME SA270 Tubes | 1.500 | 0.065 | 30,000 | 75,000 | 7,117 | 1,779 | 2,847 | 2,487 |
ASME SA270 Tubes | 1.500 | 0.083 | 30,000 | 75,000 | 9,333 | 2,333 | 3,733 | 3,136 |
ASME SA270 Tubes | 1.500 | 0.095 | 30,000 | 75,000 | 10,878 | 2,719 | 4,351 | 3,559 |
ASME SA270 Tubes | 1.500 | 0.109 | 30,000 | 75,000 | 12,754 | 3,188 | 5,101 | 4,043 |
ASME SA270 Tubes | 1.500 | 0.120 | 30,000 | 75,000 | 14,286 | 3,571 | 5,714 | 4,416 |
ASME SA270 Tubes | 1.500 | 0.134 | 30,000 | 75,000 | 16,315 | 4,079 | 6,526 | 4,881 |
ASME SA270 Tubes | 1.500 | 0.148 | 30,000 | 75,000 | 18,439 | 4,610 | 7,375 | 5,336 |
ASME SA270 Tubes | 1.750 | 0.035 | 30,000 | 75,000 | 3,125 | 781 | 1,250 | 1,176 |
ASME SA270 Tubes | 1.750 | 0.049 | 30,000 | 75,000 | 3,864 | 966 | 1,546 | 1,434 |
ASME SA270 Tubes | 1.750 | 0.065 | 30,000 | 75,000 | 6,019 | 1,505 | 2,407 | 2,146 |
ASME SA270 Tubes | 1.750 | 0.083 | 30,000 | 75,000 | 7,860 | 1,965 | 3,144 | 2,711 |
ASME SA270 Tubes | 1.750 | 0.095 | 30,000 | 75,000 | 9,135 | 2,284 | 3,654 | 3,080 |
ASME SA270 Tubes | 1.750 | 0.109 | 30,000 | 75,000 | 10,672 | 2,668 | 4,270 | 3,504 |
ASME SA270 Tubes | 1.750 | 0.120 | 30,000 | 75,000 | 11,921 | 2,980 | 4,768 | 3,832 |
ASME SA270 Tubes | 1.750 | 0.134 | 30,000 | 75,000 | 13,563 | 3,391 | 5,425 | 4,242 |
ASME SA270 Tubes | 1.750 | 0.148 | 30,000 | 75,000 | 15,268 | 3,817 | 6,107 | 4,645 |
ASME SA270 Tubes | 1.750 | 0.165 | 30,000 | 75,000 | 17,430 | 4,357 | 6,972 | 5,124 |
ASME SA270 Tubes | 2.000 | 0.035 | 30,000 | 75,000 | 2,720 | 680 | 1,088 | 1,032 |
ASME SA270 Tubes | 2.000 | 0.049 | 30,000 | 75,000 | 3,864 | 966 | 1,546 | 1,434 |
ASME SA270 Tubes | 2.000 | 0.065 | 30,000 | 75,000 | 5,214 | 1,303 | 2,086 | 1,887 |
ASME SA270 Tubes | 2.000 | 0.083 | 30,000 | 75,000 | 6,788 | 1,697 | 2,715 | 2,387 |
ASME SA270 Tubes | 2.000 | 0.095 | 30,000 | 75,000 | 7,873 | 1,968 | 3,149 | 2,715 |
ASME SA270 Tubes | 2.000 | 0.109 | 30,000 | 75,000 | 9,175 | 2,294 | 3,670 | 3,092 |
ASME SA270 Tubes | 2.000 | 0.120 | 30,000 | 75,000 | 10,227 | 2,557 | 4,091 | 3,384 |
ASME SA270 Tubes | 2.000 | 0.134 | 30,000 | 75,000 | 11,605 | 2,901 | 4,642 | 3,751 |
ASME SA270 Tubes | 2.000 | 0.148 | 30,000 | 75,000 | 13,028 | 3,257 | 5,211 | 4,111 |
ASME SA270 Tubes | 2.000 | 0.165 | 30,000 | 75,000 | 14,820 | 3,705 | 5,928 | 4,542 |
Dimensional Tolerance Of Astm A270 Sanitary Tubing
SIZE OD | NOMINAL WALL THICKNESS | OUTSIDE DIAMETER TOLERANCE | LENGTH TOLERANCE | WALL THICKNESS TOLERANCE | |||||
ASTM 270 | (in) | (mm) | (in) | (mm) | (in) | (mm) | (in) | (mm) | (%) |
ASTM 270 | ½ | 12.7 | 0.065 | 1.65 | +/-0.005 | +/-0.13 | +⅛, -0 | +3.18, -0 | +/-10.0% |
ASTM 270 | ¾ | 19.1 | 0.065 | 1.65 | +/-0.005 | +/-0.13 | +⅛, -0 | +3.18, -0 | +/-10.0% |
ASTM 270 | 1 | 25.4 | 0.065 | 1.65 | +/-0.005 | +/-0.13 | +⅛, -0 | +3.18, -0 | +/-10.0% |
ASTM 270 | 1½ | 38.1 | 0.065 | 1.65 | +/-0.008 | +/-0.20 | +⅛, -0 | +3.18, -0 | +/-10.0% |
ASTM 270 | 2 | 50.8 | 0.065 | 1.65 | +/-0.008 | +/-0.20 | +⅛, -0 | +3.18, -0 | +/-10.0% |
ASTM 270 | 2½ | 63.5 | 0.065 | 1.65 | +/-0.010 | +/-0.25 | +⅛, -0 | +3.18, -0 | +/-10.0% |
ASTM 270 | 3 | 76.2 | 0.065 | 1.65 | +/-0.010 | +/-0.25 | +⅛, -0 | +3.18, -0 | +/-10.0% |
ASTM 270 | 4 | 101.6 | 0.083 | 2.11 | +/-0.015 | +/-0.38 | +⅛, -0 | +3.18, -0 | +/-10.0% |
ASTM 270 | 6 | 152.4 | 0.109 | 2.77 | +/-0.030 | +/-0.76 | +1, -0 | +25.4, -0 | +/-10.0% |
Experienced 15+ Years
Our ability to purchase materials directly from leading mills at the best possible price will give you the competitive edge. This coupled with a skilled workforce dedicated to embracing the demands of the markets.
We Can Supply Follows Products with High Quality:
- Cold Rolled Steel Tube
- Cold Drawn Steel Tube
- Hollow Bar
- Honed Tube
- Plated Tube
- Plated Bar
- Boiler Tube
All Products According Quality Standard Strictly:
- ASTM: ASTM A519, ASTM A513.
- JIS:JIS G3441, JIS G3445, JIS G3466, JIS G3459.
- DIN: DIN1626, DIN1629, DIN2391, DIN2393, DIN2448, DIN2458.
- EN: EN10305.
- BS: BS6323.
Wide Range of Pipes to Fit Your Industry:
- OD from 5mm to 820mm.
- Wall Thickness from 0.1 to 100mm.
- Length up to 50mtr per pc.
Can’t Find What You Looking for? Check Popular Items Blew.
Direct from the Source and Deliver to You in a Very Fast and Efficient Timeframe.